Phos-Copper-Silver Brazing Alloy
Introduction
Phos-Copper-Silver Brazing Alloy(Low Silver solder) can reduce melting point, improve plasticity of brazing alloy and wettability of copper, as well as brazing alloy’s strength and toughness. With good fluidity and brazing property, this kind of brazing alloys is suitable for brazing copper and copper alloy parts, and some can be suitable for brazing shake copper with copper, copper with brass in air conditioner and freezer; brazing copper with copper alloy joints in electric motor and meter.
Technical Index
Code | Related Standard | Chemical Composition | Impurity Amount | Melting Temperature | |||
Ag %
|
Cu %
|
P %
|
Solidus℃ | Liquidus℃ | |||
JAgP-1 | CWA:BCu92PAg | 0.9- 1.1 | REM | 6.8- 7.2 |
≤0.15 |
643 | 796 |
JAgP-2 | CWA:BCu91PAg AWS:BCuP-6 |
1.8- 2.2 | REM | 6.8- 7.2 | 645 | 790 | |
JAgP-3 | CWA:BCu90PAg | 2.8- 3.2 | REM | 6.5- 6.8 | 645 | 800 | |
JAgP-5A | CWA:BCu88PAg AWS:BCuP-7 |
4.6- 5.2 | REM | 6.8- 7.1 | 645 | 765 | |
JAgP-6 | CWA:BCu87PAg AWS:BCuP-4 |
5.8- 6.2 | REM | 6.8- 7.5 | 645 | 724 | |
JAgP-10 | CWA:BCu84PAg | 9.0- 11.0 | REM | 5.5- 6.5 | 645 | 790 | |
JAgP-15 | CWA:BCu80PAg | 14.5-15.5 | REM | 4.8- 5.3 | 645 | 800 | |
JAgP-18 | AWS:HgHSil-FOS | 17.5-18.5 | REM | 6.2- 6.5 | 645 | 680 | |
JAgP-20 |
|
19.5-20.5 | REM | 4.5- 5.5 | 645 | 740 | |
JAgP-25 | Russia: Ncp25Ф | 24.5-25.5 | REM | 4.8- 5.3 | 645 | 710 | |
JAgP-5B | CWA:BCu89PAg AWS:BCuP-3 |
4.8- 5.2 | REM | 5.8- 6.7 | 645 | 785 |
Packaging
1.Standard export seaworthy packing: with polyethylene film including drier, put them in carton;
2.According to the customer's different requirements packing.
Note
1. P: phosphorus; AG: Silver; Cu: copper;
2. CWA: China welding association; AWS: America welding Society; Russia:(unknown);
3. REM: Remain;
4. With low phosphorus content suitable for brazing large gap joints; with high phosphorus content suitable for brazing small gap joints.
Realate Products
-
Phos-Copper Brazing Alloy
Phos-copper brazing alloy(No silver solder) is base on the raw material with the binary alloy of copper-phosphorus.It has good fluidity,good strength, low cost, perfect processing property. No need to add flux when brazing copper and silver.
MORE -
Brass Brazing Alloy
Brass brazing alloy is composed of copper-zinc alloy. It has good toughness, high temperature resistance and corrosion resistance, etc. It’s suitable for brazing copper, mild steel, cast iron, nickel alloy, hard alloy and other materials.
MORE