Brass Brazing Alloy
Introduction
Brass brazing alloy is composed of copper-zinc alloy. It has good toughness, high temperature resistance and corrosion resistance, etc. It’s suitable for brazing copper, mild steel, cast iron, nickel alloy, hard alloy and other materials.
Technical Index
Code | Related Standard | Chemical Composition | Impurity Amount | Meltingtemperature | Recommended brazing temperature Range ℃ | ||||
Cu%
|
Ni%
|
Other | Zn%
|
Solidus℃ | Liquidus℃ | ||||
BCu62Zn | China HL104 | 61-63 | 0.3-0.5 | Mn: little Si: little Sn: little | REM |
≤0.15 |
850 | 875 | 910-935 |
BCu60ZnSi | China 8221 | 59-61 |
/ |
Si: 0.25 Sn:0.8-1.2 | REM | 890 | 900 | 880-900 | |
BCu59ZnSn |
|
58-60 |
/ |
Sn:1.0 Si: little | REM | 800 | 840 | 900-930 |
Packaging
1.Standard export seaworthy packing: with polyethylene film including drier, put them in carton;
2.According to the customer's different requirements packing.
Note
1, Cu: copper; Ni: nickel; Zn: zinc; Mn: manganese; Si: silicon; Sn:Stannum;
2, REM: Remain.
Realate Products
-
Phos-Copper Brazing Alloy
Phos-copper brazing alloy(No silver solder) is base on the raw material with the binary alloy of copper-phosphorus.It has good fluidity,good strength, low cost, perfect processing property. No need to add flux when brazing copper and silver.
MORE -
Phos-Copper-Silver Brazing Alloy
Phos-Copper-Silver Brazing Alloy(Low Silver solder) can reduce melting point, improve plasticity of brazing alloy and wettability of copper, as well as brazing alloy’s strength and toughness.
MORE