0 silver brazing rod
Introduction
0 silver brazing rod is one of Qixing Welding Material Company's best selling products. it is suitable for brazing kinds of copper with copper alloy or brass joints where close tolerance can be maintained.
And there are different sizes.
In addition, we support size customization. When you need 0 silver (phos-copper) welding rings, we can still provide it.
Technical Index
Code |
Related Standard |
Chemical Composition |
Melting Temperature |
Major Characteristic |
Typical Application |
|||
P% |
Sn% |
Cu% |
Solidus℃ |
Liquidus℃ |
||||
JCuP-1 |
CWA:BCu92P |
7.5-8.5 |
—— |
REM |
710 |
780 |
Close to eutectic composition, low melting point, good fluidity, fill into small clearance of brazing seam |
Suitable for brazing copper with copper alloy parts, in refrigerator, Fuel gas appliances, etc. Should not be in shock and vibration welding bent parts. |
JCuP-2 |
CWA:BCu93P AWS:BCuP-2 |
6.5-7.5 |
—— |
REM |
710 |
800 |
lower phosphorus content; improve plasticity, higher melting point. |
Suitable for brazing copper with copper alloy in air-conditioners, refrigerators, evaporator, heat exchanger, water heater, etc. can be made welding ring, brazing medium gap joints. |
JCuP-3 |
|
6.1-6.8 |
—— |
REM |
710 |
820 |
Lower phosphorus content; good plasticity, higher melting point. |
Can be made kinds of welding rings, flat wires, Suitable for brazing copper with copper alloy parts, |
JCuP-3Sn |
CWA:BCu88PAg |
6.5-7.5 |
6.5-7.5 |
REM |
640 |
680 |
Good spreading property and clearance fill-ability |
Suitable for brazing kinds of copper with copper alloy. |
JCuP-5Sn |
CWA:BCu86SnP |
4.8-5.8 |
7.0-8.0 |
REM |
620 |
670 |
Low melting point and good fluidity. |
Suitable for brazing copper and brass parts in water heater, electric heater, sanitary appliance, etc. |
Packaging
1. It can be made into three shapes:
Note
1.Supply free sample: 1-2 pieces
2.discount activity: 2% discount for first orders over 1000kg
3.Provide ROHS and SGS certificates
4.Free size customization
Realate Products
-
Phos-Copper Brazing Alloy
Phos-copper brazing alloy(No silver solder) is base on the raw material with the binary alloy of copper-phosphorus.It has good fluidity,good strength, low cost, perfect processing property. No need to add flux when brazing copper and silver.
MORE -
Brass Brazing Alloy
Brass brazing alloy is composed of copper-zinc alloy. It has good toughness, high temperature resistance and corrosion resistance, etc. It’s suitable for brazing copper, mild steel, cast iron, nickel alloy, hard alloy and other materials.
MORE